Prior to the Transor, end users struggled with various forms of filtration, including paper roll filters, cartridges, centrifuges and pre-coat systems. These provided inferior filtration levels, high operating costs and were maintenance intensive.

 

The Transor System provides One Micron Filtration and is virtually maintenance free. Operating on the principle of edge filtration, dirty oil is forced toward the center of each element and particles larger than One Micron are trapped on the filter “edge” (FIGURE 1). Rather than being replaced, the elements are cleaned automatically with compressed air that removes the debris and places it into a receptacle for reclamation or disposal (FIGURE 2). Life expectancy of the filter elements is approximately 25,000 hours, however, this figure is often times
greatly exceeded.

FIGURE 2

Machining with oil filtered to this level offers substantial benefits that include faster cycle times, finer surface finishes and improved accuracy. In addition, due to the fine filtration and temperature control of the oil, the life span of the oil used is greatly extended.

FIGURE 1

See why OMF is Superior Filtration

 

Fill out the form to find out more about OMF., the ABSOLUTE way to better productivity in your operation.

Submitting Form...

The server encountered an error.

Form received.

See why OMF is Superior Filtration

 

Fill out the form to find out more about OMF, the ABSOLUTE way to better productivity in your operation.

Submitting Form...

The server encountered an error.

Form received.

PHONE:  847.640.0273  |  TOLL FREE:  800.354.3040

© 2018 Transor Filter USA   All Rights Reserved

FIGURE 1

FIGURE 2

Machining with oil filtered to this level offers substantial benefits that include faster cycle times, finer surface finishes and improved accuracy. In addition, due to the fine filtration and temperature control of the oil, the life span of the oil used is greatly extended.

Prior to the Transor, end users struggled with various forms of filtration, including paper roll filters, cartridges, centrifuges and pre-coat systems. These provided inferior filtration levels, high operating costs and were maintenance intensive.

 

The Transor System provides One Micron Filtration and is virtually maintenance free. Operating on the principle of edge filtration, dirty oil is forced toward the center of each element and particles larger than One Micron are trapped on the filter “edge” (FIGURE 1). Rather than being replaced, the elements are cleaned automatically with compressed air that removes the debris and places it into a receptacle for reclamation or disposal (FIGURE 2). Life expectancy of the filter elements is approximately 25,000 hours, however, this figure is often times greatly exceeded.

 

 

See why OMF is Superior Filtration

 

Fill out the form to find out more about OMF, the ABSOLUTE way to better productivity in your operation.

Submitting Form...

The server encountered an error.

Form received.

PHONE:  847.640.0273  |  TOLL FREE:  800.354.3040

© 2018 Transor Filter USA   All Rights Reserved

Prior to the Transor, end users struggled with various forms of filtration, including paper roll filters, cartridges, centrifuges and pre-coat systems. These provided inferior filtration levels, high operating costs and were maintenance intensive.

 

The Transor System provides One Micron Filtration and is virtually maintenance free. Operating on the principle of edge filtration, dirty oil is forced toward the center of each element and particles larger than One Micron are trapped on the filter “edge” (FIGURE 1). Rather than being replaced, the elements are cleaned automatically with compressed air that removes the debris and places it into a receptacle for reclamation or disposal (FIGURE 2). Life expectancy of the filter elements is approximately 25,000 hours, however, this figure is often times greatly exceeded.

 

 

Machining with oil filtered to this level offers substantial benefits that include faster cycle times, finer surface finishes and improved accuracy. In addition, due to the fine filtration and temperature control of the oil, the life span of the oil used is greatly extended.

FIGURE 1

FIGURE 2

See why OMF is Superior Filtration

 

Fill out the form to find out more about OMF, the ABSOLUTE way to better productivity in your operation.

Submitting Form...

The server encountered an error.

Form received.

PHONE:  847.640.0273  |  TOLL FREE:  800.354.3040

© 2018 Transor Filter USA  
All Rights Reserved

Prior to the Transor, end users struggled with various forms of filtration, including paper roll filters, cartridges, centrifuges and pre-coat systems. These provided inferior filtration levels, high operating costs and were maintenance intensive.

 

The Transor System provides One Micron Filtration and is virtually maintenance free. Operating on the principle of edge filtration, dirty oil is forced toward the center of each element and particles larger than One Micron are trapped on the filter “edge” (FIGURE 1). Rather than being replaced, the elements are cleaned automatically with compressed air that removes the debris and places it into a receptacle for reclamation or disposal (FIGURE 2). Life expectancy of the filter elements is approximately 25,000 hours, however, this figure is often times greatly exceeded.

FIGURE 2

FIGURE 1

See why OMF is Superior Filtration

 

Fill out the form to find out more about OMF, the ABSOLUTE way to better productivity in your operation.

Submitting Form...

The server encountered an error.

Form received.

Machining with oil filtered to this level offers substantial benefits that include faster cycle times, finer surface finishes and improved accuracy. In addition, due to the fine filtration and temperature control of the oil, the life span of the oil used is greatly extended.

PHONE:  847.640.0273

TOLL FREE:  800.354.3040

© 2018 Transor Filter USA  
All Rights Reserved

Prior to the Transor, end users struggled with various forms of filtration, including paper roll filters, cartridges, centrifuges and pre-coat systems. These provided inferior filtration levels, high operating costs and were maintenance intensive.

 

The Transor System provides One Micron Filtration and is virtually maintenance free. Operating on the principle of edge filtration, dirty oil is forced toward the center of each element and particles larger than One Micron are trapped on the filter “edge” (FIGURE 1). Rather than being replaced, the elements are cleaned automatically with compressed air that removes the debris and places it into a receptacle for reclamation or disposal (FIGURE 2). Life expectancy of the filter elements is approximately 25,000 hours, however, this figure is often times greatly exceeded.

 

FIGURE 2

FIGURE 1

Machining with oil filtered to this level offers substantial benefits that include faster cycle times, finer surface finishes and improved accuracy. In addition, due to the fine filtration and temperature control of the oil, the life span of the oil used is greatly extended.

See why OMF is Superior Filtration

 

Fill out the form to find out more about OMF, the ABSOLUTE way to better productivity in your operation.

Submitting Form...

The server encountered an error.

Form received.

© 2018 Transor Filter USA   All Rights Reserved

P:  847.640.0273   |   F:  800.354.3040